Fiamma F45 Eagle Awning
Fiamma F45 Eagle is an automatic self supporting motorhome awning without legs
It is designed for wall installation and is supplied as standard with brackets
For maximum ease the 12V electric awning can be easily operated by using the rocker switch inserted in the wall of the vehicle
It comes as standard with Wind Detection System. This incorporates a wind sensor that automatically activates the 12V motor and automatically closes the awning in the event of strong winds, thus avoiding possible damage
The awning can also be closed manually in case of emergency
The self-supporting arms are reinforced thanks to the sturdy duralumin Double Block that doesn’t require the use of support legs
The angle of inclination of the arms is prefixed at 10 degrees, but can be changed according to the height of motorhome from 5° to 17°, enabling the correct flow of the water
The awning has a double guide in the lead bar to allow two front panels to be fitted or other accessories.
The arms have cable ducts included so it is easy to fit the cables for LED lights
|Description||Awning Length (A)||Canopy Length (B)||Extension (C)||Surface Shade|
|F45 Eagle 350||366cm||335cm||250cm||8.3m2|
|F45 Eagle 400||416cm||385cm||250cm||9.6m2|
|F45 Eagle 450||466cm||435cm||250cm||11.0m2|
Important Information: You must verify with your trusted dealer/fitter if your vehicle is suitable for the installation of the F45 Eagle with the sturdy full length aluminium bracket. The vehicle must be sturdy enough to support the weight and tension of the open awning due to it not having support legs.
Fiamma refuses all responsibility for any damage to the walls of the vehicle or for water ingress caused by incorrect installation or due to the awning being fitted on unsuitable vehicles. Please check with a qualified fitter as to suitability